How to change signal light switch 1997 ford truck?

REMOVAL





Disconnect the battery ground cable.

















Remove the ignition switch lock cylinder.

(1) Insert the ignition key into the ignition switch lock cylinder and turn to the RUN position.

(2) Push the (A) ignition switch lock cylinder release tab with a punch while pulling out the (B) ignition switch lock cylinder.



















If equipped, twist the tilt wheel handle and shank and remove.

















Release the (A) four clips and remove the (B) steering column opening cover.

















Remove the upper and lower steering column shrouds.

(1) Remove the three screws.

(2) Remove the lower steering column shroud.

(3) Remove the upper steering column shroud.



















Remove the multi-function switch.

(1) Remove the two screws.

(2) Disconnect the electrical connectors.

(3) Remove the multi-function switch.



NOTE: The steering wheel has been removed for clarity.



































INSTALLATION





To install, reverse the removal procedure. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.





















漏 2006 ALLDATA LLC. All rights reserved.

Terms of Use
How to change signal light switch 1997 ford truck?
are you talking about the little relay by the foot brake or the hand lever on the steering column?